CNC milling machine for metal FM-3020

Specifications

Working area

At least 3000 × 2000 × 300 mm

Drive type, all three axes

All axes X, Y, Z: precision ground large-diameter ball screws 3210 / 4010 (accuracy class C5). Twin ball screws on the Y axis (synchronised gantry)

Linear guides

All three axes X, Y, Z: heavy square profile rails HG30 (wider, 30 mm) with four long carriages per axis.

Positioning accuracy

0.02 mm

Maximum rapid traverse speed

Up to 6,000–8,000 mm/min (optimised for heavy-duty screw drives to achieve maximum thrust).

Acceleration

Up to 1.0 m/s².

Table surface

Dedicated reinforced aluminium profile with T-slots for machine vices, clamps and dividing heads.

Workpiece clamping

T-slots.

Motion system, all three axes

Industrial servo drives with encoder, 1000–1500 W

Supply voltage

380 V, 3 phases, 50 Hz

Spindle power

5.5 kW, industrial, liquid-cooled, ER32 / ER40 collet chuck

Spindle cooling

Liquid (water) cooling in a closed loop via a dedicated industrial chiller.

Tool cooling (coolant) system

Included as standard. Automatic adjustable coolant feed (emulsion or oil mist under air pressure) directly into the cutting zone to cool the cutter and flush metal chips out of deep slots.

Maximum table load

800 kg

Motion system protection

Dedicated protective bellows on all axes to keep sharp metal chips and corrosive coolant off the guides and ball screws.

Control module

Industrial CNC control unit supporting tool radius compensation and macros for metalworking. Inductive limit sensors are included as standard.

Machine weight

At least 3200 kg